The Future Will Not Be Like The Past (2)

“We do not have to revert to the old ways but, for many good environmental reasons, we do need to find alternatives that offer the same benefits.”

Ralph L. Knowles in “Sun Rhythm Form” (1981). You can read about Knowles’ work in “The solar envelope: how to heat and cool cities without fossil fuels“.

Ceramic Food Steamer With Central Chimney

Steaming food (vegetables as well as fish, meat and rice) is an interesting cooking method, mainly for two reasons: contrary to frying there is no need to use fat, and compared to both frying and boiling less nutrients are lost.

Ceramic Food Steamer With Central ChimneyAlmost all food steamers or steam cookers on the market work by virtue of many little holes, through which the steam rises from the boiling water below. The disadvantage of this method is that you lose the bouillon of the food, as well as the spices you might add.

When I visited my cousin last week in the French Dordogne, I stumbled upon a ceramic steamer in her kitchen. It was hand made by Laurent Merchant, an artisan living and working in the region. Ceramic food steamers are everything but new — they were already used in Neolithic China 6 to 7000 years ago* — but this one was different. Just like any other steam cooker, it is placed above a pot with boiling water. However, the steam enters through a central chimney rather than through dozens of little holes. The obvious advantage is that you don’t lose the juice, which greatly increases the potential uses of steaming.

Some commercially available steamers feature a condensation catchment, but in that case you can only use the bouillon separately, or add it to the food later. Furthermore, the ceramic steamer offers several additional advantages. Its design allows you to easily warm up earlier made dishes or leftovers following the same cooking method, because the device also serves as a perfect storage container and the steam prevents the food from drying out or sticking together. The steam cooker is also particularly suitable for defrosting food, and it is much easier to clean than conventional devices. Last but not least, it is made from sustainable materials and looks great, which cannot be said of most plastic food steamers.

Chinese ceramic steamer with central chimney photo by laurent merchantLaurent Merchant did not invent the device, which he dubbed “Le steamer”. Ceramic steamers with a central chimney originated in China, where they might have been in use for many centuries in the region around Shanghai. They resurfaced in California in the 1970s, where the artisan saw them for the first time. I could not find any information on their history, but in 2007 Merchant stumbled upon an authentic Chinese specimen which he could photograph (picture on the right — more pictures here).

Le steamer” is available in different sizes (from 1 to 4.5 litres) and can be ordered online. Laurent Merchant’s website is in French, but he will answer your questions in perfect English.

* Joseph Needham, Science and Civilisation in China, Volume 5, part 5: fermentations and food science, page 76-91

The Future Will Not Be Like The Past (1)

“We imagine that energy decline and economic collapse will eradicate all high tech, and reduce the whole planet to a preindustrial lifestyle, because it’s easy to imagine. It’s harder to imagine a collapse that’s unevenly distributed. Historically, economic collapses do not reduce everyone to poverty, but increase the gap between rich and poor. I think the same thing is going to happen with technology: while overall resource consumption decreases, the proportion spent at the leading edge of technology will increase. Less energy will be spent moving physical stuff, and more will be spent moving information.”

“Not only will there be a wider gap between the places with the highest and lowest technology, there will also be a wider gap between the highest and lowest technology used by an average person. Already there are African villagers with cell phones. In 20 years you may be living with a group of friends in an abandoned suburb, burning scrap wood for heat, growing open-source genetically modified sweet potatoes, and selling brain time to the dataswarm to gain credits for surgery to install a neuro-optical interface so you can swap out custom eyeballs.”

Quoted from Ran Prieur’s blog.

The Concrete Lathe Project

concrete lathe

“Metalworking lathes are necessary to the production of almost everything but are very expensive. In 1915, special lathes made from concrete were developed to quickly and cheaply produce millions of cannon shells needed for World War I.

Lucien Yeomans, the inventor, won the nation’s highest engineering award for it but sadly the technique was almost forgotten after the war. We re-discovered it as a way to quickly make inexpensive but accurate machine tools for use in developing countries and in trade schools and shops everywhere.”

Pat Delany developed a metalworking lathe design that uses concrete parts cast in wooden molds to achieve high precision at a rock-bottom price of $150. Find the detailed building plans at Make Projects. Also check out Pat Delany’s low-cost DIY machine tools (such as a hand-powered drill and a treadle-powered generator), all built from recycled parts.

Velomobiling

A fifteen minute ride in a velomobile. Previously: The velomobile: high-tech bike or low-tech car?

Open Source Energy Production: The Solar Fire P90

solar fire p90

Solar Fire is currently testing a larger version of its low-tech solar concentrator; the Solar Fire P90. Just like its smaller predecessor the Solar Fire P32 (which we covered before), the machine can produce heat, electricity and direct mechanical energy, making it suitable to manufacture almost anything on your roof or in the garden.

The Solar Fire P90 delivers up to 5 kW of electricity and 40 kW of thermal energy, is built using simple, abundant and non-toxic materials, and requires no foundation in the ground. The frame size is 11.5 x 11.5 metres and the machine requires an area of 16 x 16 metres for revolving.

Tracking is done by hand using a simple but ingenious system — one person can operate up to five of these solar concentrators at the same time. The Solar Fire P90 is an open source design, but it can also be bought for about $ 12,000, excluding transport costs.

A video of the tests can be found here. For more information on the workings and applications of these kinds of machines, see the article “The bright future of solar thermal powered factories“.

Picture: Solar Fire.